The Guided Reflection Board (similar to instruction manual) gives structure to the Collabyrinth experience when coupled with the "Training Wheel Maze" (see below for download). It can be downloaded here as a pdf. Begin at "START" and read the "Human Interactions", "Technical Habits", and "Hints" for each segment as you play according to the instructions above.
Here is a .stl file for the "Training Wheel Maze". It is best to follow these guidelines for printing:
Print in ASA for best longevity, PLA for best playing surface. 0.2mm layer height is fine.
"Iron" top layers after doing some testing to find the best ironing deposition rate for your printer.
Print in a heated chamber - the surface area of the maze is large and warping can be a problem for open-bed printing
Here is a .stl file for the octagonal connector that mates the maze to the playing hardware. Follow these guidelines:
Print in ASA or PETG for best long-term results. Use plastic epoxy to connect the octagonal connector to the back of the maze - roughen both surfaces first with sandpaper.